Until the appearance of mold, it can come to the point where your home is exposed to moisture. Molds from your home can be difficult to remove. Apart from the formidable odor that leaves the mold, and the unpleasant smell can also be quite harmful to the health of people. The mold most often appears on walls, windows, ceiling tiles. If you notice mold in your home, remove it properly or avoid unnecessary exposure to that area where there is mold. To remove mold from your home, you need to remove the moisture source. As the most famous sources of moisture in the interior of the house, as well as the reasons for the appearance of mold are the shower and the toilet, as well as the water in the kitchen. Other reasons for the appearance of mold are the lack of ventilation as well as hot and cold differentials within the structure. Once you have removed the mold, you should access the drying facilities in your home. The most suitable natural source for drying the affected areas is the heat and light as well as the movement of the air.
Here are some ways to remove the mold.
With the help of an iron brush, remove the mold from the wall in the house. Then take a bucket and put about 10 liters of water in it and dissolve 5-6 tablespoons of lime in it. Then apply the brush to the place where the mold was previously removed. Leave for about 1 hour to dry. When working to protect yourself, use protective goggles, rubber gloves. Use the humidifier in the area where there is mold. before, during cleaning and after cleansing to reduce the spores of the mold.
Another way to remove mold from your home is by using hot water. Remove the furniture from your home and spray the walls with the help of a hose. Open the air purifying windows. Let it dry throughout the day. Then clean the walls with a clean and dry cloth. But be careful not to damage it.
When the area is dry and clean, take a vacuum cleaner to vacuum the entire surface of the mold, including floors, walls and ceilings. Because mold spores can be very allergic, it is therefore necessary to remove microscopic spores as much as possible. After you remove all impurities from the vacuum cleaner, then wash it thoroughly so that the mold does not reappear. At the end of the walk, repaint the walls with your favorite color.
Do not wait, try the steps that we have given you earlier. The results are excellent.